If you’re unfamiliar with operating a pallet jack, the most basic safety rules are to stand with your hands firmly on the metal steering handle. While standing, avoid loading the load higher than your eyes. If necessary, enlist a spotter to hold the material as you lift it. Make sure your body and head are aligned correctly to avoid strains and injuries. Manual pallet jack operators should remember to keep their head upright and not tilt too far and always pull when going up inclines, never push.
Always raise and lower the forks by pumping or pushing the handle. Then, keep the load level with the floor. One inch of clearance between the floor and the pallet should be sufficient. When the forks are lower than the load, they stabilize the truck and prevent accidental rolling. Once a pallet is in place, push the handle downward to release the forks. You may want to check the load’s balance before attempting to lower it. For a range of Pallet Trucks Ireland, visit a company like forkliftandpallettrucks.ie/
When moving heavy loads up or down, operators should be sure to maintain a clear line of sight. When loading a load, avoid placing the load above your head. If there is an obstacle, seek help from a spotter. Also, when moving up or down a ramp, keep the forks low to the ground. This will help stabilize the load and prevent accidental rolling. While operating a pallet jack, keep a careful eye on the load and follow the tips in this article.